HAND MADE POLE FLOATS.
The products below are a small range which are all hand made in the UK for Benwick Sports to the highest standards.
As these floats are not mass produced the body shape, stem length etc. may vary slightly from those shown.
PELLI STIX
This float is perfect for shy biting F1's and has a 1.5 mm hollow tip with a glass fibre stem. The body is 5mm diameter and it has a spring side eye. Overall length is between 6.5-7inches.
MARGIN MO'S "XT"
BODY COLOUR MAY VARY.
SLIM JIM "XT"
1.5mm hollow bristle and spring eye. NEW "XT" MATERIAL.
PELLI PASTE
The body is approx. 5mm diameter and the stem is 1.0mm wire. Overall length is 200mm with the 2mm bristle which is 50mm long.
BEANIE
The body is approx. 10mm diameter and the float is about 30mm long including the stem.
POWER TRAP
BODY COLOUR MAY VARY
PELLET MUGGER
The body is approx. 11mm diameter and the float is about 160mm long including the stem.
PELLET MUGGER "XT"
POWER TRAP "XT"
MORE PATTERNS COMING OVER THE NEXT FEW MONTHS.
ALL PRICES AND SPECIFICATIONS MAY CHANGE AT ANY TIME
AND ARE ONLY INTENDED AS A GUIDE.
All Trademarks Apply To Their Registered Companies.
No Copyright Infringement Intended.
X